To change the handle on the door
1. Use a very strong cotton thread or a thin piece of wire. Put it between the handle and the mirror and slice down through the bonding. Make sure someone is holding the door while you are doing this.
2. Remove the residues of the double sided tape, by using lighter fluid, “Sticky Stuff Remover” or similar solvent. “Do not to use Nail Polish Remover, because this will damage the materials in your cabinet”.
3. Then use soapy water to clean the area and rise with clear water. Make sure the area is buff dry and no residue is left on it. Please leave for 1 hour to make sure the area is completely dry – very important!
4. You can then fit the new handle, by pressing it on with your fingers and thumb for 30 seconds. Please leave the cabinet doors open overnight to allow the handle to bond with the door.